Around a hundred bonding agents on the market and one system from dental school. Dr. Tony Mennito, clinician, researcher and MUSC professor, takes bonding back to its three steps and forward to universal adhesives, selective etching, isolation, curing and bonding to zirconia and glass ceramics. Seven lessons, 84 minutes, 2 CPD/CE hours.

Anton Martin walks the Dentsply Sirona mill range on real units: Primemill, MC X, MC XL Premium, inLab MC XL and the 5-axis MC X5, with the Primemill interface screen by screen. Recorded June 2022. 1.5 CPD hours.

Anton Martin takes you through CEREC 5.1.2 with a Primescan, tab by tab and then case by case: his parameter presets with the reason for each, scanning, the model phase, the design tools in order, eight troubleshooting cases, six bridges, three implant designs, the guide, smile design and the virtual articulator. Ten chapters, 42 lessons, 13 CPD hours.

The scanner is bought or the quote is on the desk, and nobody has shown you the whole workflow. Dr. Hamid Al-Hassiny and Dr. Ahmad Al-Hassiny walk it from choosing the system to bonding the crown, the lectures of their 2021 Wellington live course. Three chapters, ten lessons, 251 minutes, 5.5 CPD/CE hours.

Anton Martin sets up and drives Dentsply Sirona inLab screen by screen: case setup for every indication, his parameter presets with the reasons behind them, DXD and STL imports, model clean-up, the design tools and export to the mill. 4 CPD hours, three quizzes.

The scan, the prep, the design, the block and the furnace all decide whether a same-day crown fits and looks like a tooth. Dr. Ahmad Al-Hassiny walks the whole chairside workflow, then processes every material family step by step, e.max, zirconia, hybrid and high glass ceramics, and cements a crown to a TiBase. Eleven chapters, 41 lessons, 280 minutes, 7 CPD/CE hours.